HD-9STX Four-Post Lift- Tall Lift and Narrow Width

User Manual Download

Sales Sheet Download

Warranty Download

More Height in Less Floor Space

The HD-9STX is your 4,082-kg. rugged lifting solution for when you need get something heavy and high, but you don't have a lot of space on the ground. Perfect for vehicle storage and service—in the shop or garages with high ceilings. Whether you're a service professional or a DIY'er, BendPak’s got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more.

With more height to work with, this lift does something others do not: it fits trucks and SUVs in the lower level. This is essential for parking purposes, especially if your lower-level vehicle is too heavy for the runways. A high-rise lift also increases the comfort of techs working underneath. Pulling transmissions and draining oil is safer and easier on high-rise car lift. The HD-9STX eliminates stooping and awkward straining when accessing the vehicle underbody. When you’re uncomfortable, you’re more likely to make mistakes, and there’s nothing better than a car lift that lifts to the perfect height. The HD-9STX maximizes versatility in a car liftt that adapts to your height and lifestyle. The narrow designs fits in the same floor space as the HD-9ST but requires a bit more ceiling height to fully enjoy.

The HD-9STX is an ALI Certified Car Lift

Features

4,082-kg. maximum lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
Freestanding design
Narrow-width
High-rise
Perfect for parking, storage and service
Runways accommodate narrow and standard vehicles
Runways include rail-kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks and sheaves
Internal anti-sway slider blocks in each column
Oversized self-lubricating cable rollers
Features heavy-duty 9.5 mm aircraft cable
Rugged 32 mm roller axles
Multi-position safety locks in each column
Adjustable lock ladders
Push-button pneumatic safety release
Independent backup slack-cable safety latches
Customizable power unit location
Removable approach ramps for additional drive-under clearance
Longer approach ramps for low-ground clearance vehicles
Optional drive-thru ramps available
Optional drip trays available
Optional solid deck available to increase storage capacity
Optional 2,041-kg. air / hydraulic rolling jacks available (Model RJ-45)
ETL Approved

HD-9STX Specifications

Capacity

Lifting Capacity*

9000

*Max Capacity / Front Axle

4500

*Max Capacity / Rear Axle

4500

Rise

A - Min. Runway Height:

4.5

B - Max. Rise:

82

C - Max. Lifting Height:

86.5

Time to Full Rise:

50 seconds

Outside Dimensions

D - Overall Width:

100.25

E - Outside Length:

198

F - Overall Length:

224

G - Height of Columns:

100

Inside Dimensions

H - Width Between Columns:

89.75

I - Drive-Thru Clearance:

76.5

Runways

J - Runway Width:

19

K - Length of Runways:

188

L - Width Between Runways:

or 37.5

M - Runway Centerline:

or 56.5

N - Outside Edge of Runways:

or 75.5

Minimum Wheelbase

Rated Capacity:

135

75% Capacity:

115

50% Capacity:

95

25% Capacity:

80

Locking

Locking Positions:

15

Lock Spacing:

Every 4" / 102 mm

Power Unit

Motor:

220 VAC / 60 Hz. 1Ph.

Noise:

45 dB

Shipping

Weight:

808.3 kg (1,782 lbs.)

Dimensions:

4,826 mm x 559 mm x 889 mm (190'' x 22'' x 35'')

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

More Height in Less Floor Space

Study in Lift Design

Specifications

Warranty

Balancing Safety

Best Car Lift Guide

Things to Know